PRINT CONNECTION UPDATE — 10 November 2026 The current connection sends native Brother QL-1100 raster data through the Windows RAW queue. Each job explicitly selects 1.1-inch continuous (DK-2210, 29 mm) or 4.07-inch continuous (DK-2246, 103 mm), 300 dpi, and cutting after every label. Generic Windows custom paper sizes are no longer used. Existing Windows installations: download and run Connect-Jenn-O-Choc-Printer.cmd again, select the Brother queue, and click Connect and start automatically. This replaces the old running connection. The website blocks jobs from older connections. Load the roll selected in the wizard. A spooled result confirms Windows accepted bytes, not that paper printed. Check the first physical label and cut. Never automatically retry a failed or interrupted batch. Earlier setup notes (driver paper preferences apply to the previous connection): JENN O' CHOC LABEL WIZARD — WINDOWS USB PRINTING Open the wizard from any device on the same network: http://192.168.0.10:8010 Tailscale users can use http://100.74.170.90:8010 Only the computer connected to the Brother by USB needs the bridge. It must remain on with this bridge running. Other devices use the website. ONE-TIME LAPTOP SETUP — NO COMMANDS 1. On the USB-connected Windows laptop, open the wizard and click Printer setup. 2. Download Windows driver from that panel if the Brother driver is not installed. Run the downloaded Brother installer and connect USB. 3. Click Connect printer on Windows. Double-click the downloaded Connect-Jenn-O-Choc-Printer.cmd file. 4. Choose the Brother queue. In Printer preferences, select the loaded continuous roll, 300 x 300 dpi, and Auto Cut. Click Connect and start automatically. It is installed for the current user, without admin rights. 5. Return to the wizard. Connection status updates within a few seconds. Print sends directly to the Windows printer queue without opening a new page or print dialog. Leave the laptop on. Other devices can use the wizard to send to this connected laptop. The connection starts automatically at Windows sign-in. It lives under %LOCALAPPDATA%\JennOChocPrinter and has a shortcut in the user's Startup folder. Its system-tray menu can disconnect it. Re-run setup to reconnect. Changing the selected roll in the wizard requests that continuous width from the driver. Load matching paper and keep the Brother driver preferences consistent with the paper. Physical roll detection, size, and cutting must be checked in the first one-label test. No physical print test has passed yet. DRIVERS STORED ON 7FM Windows: http://192.168.0.10:8010/drivers/Brother-QL1100C-Windows.exe Mac: http://192.168.0.10:8010/drivers/Brother-QL1100C-Mac.dmg Source URLs, versions, sizes, SHA-256 hashes: http://192.168.0.10:8010/drivers/manifest.json These are unmodified official Brother installers, downloaded after the owner accepted Brother's EULA. For private LAN/Tailscale use only. Brother does not provide this Windows driver for ARM Windows devices. PACKAGING BANK AND LABEL SIZING On the first screen, open Box / bag & label space. Enter a packaging name, front-face width and height in inches, and the available label-space width and height. Save bag / box to packaging bank, then Apply package settings. Saved packaging is available across devices. Choose it from Choose a saved bag or box next time. For the single label on each package, enter the product name and actual net weight without packaging (for example, 4 oz (113 g)). These are saved with the label; they do not become part of the reusable packaging record. Use Ingredient order / custom ingredient text to put the statement in the actual recipe's order by weight if needed. Otherwise the app combines the selected declarations in saved bank order and removes exact duplicates. The renderer uses the general FDA 1/16-inch lowercase-o height minimum for ingredients and business details, measured from the actual font at 300dpi. The Florida cottage-food statement is at least 10-point type. Net-weight type is sized from the rectangular front-face area. No small-package exemption is assumed. These layout rules do not certify the whole label's legal compliance or determine accurate ingredient weights/allergen content. Preview shows whether the selected roll fits the label space, including possible sideways placement. If it does not fit, use a different roll, larger label area, or different packaging. Text is not silently reduced below the configured minimum. Place the actual label so required text, including the net-weight declaration, has the correct package orientation. Existing labels are retained; add package details and save the label again. References: https://www.fda.gov/files/food/published/Food-Labeling-Guide-%28PDF%29.pdf https://www.flsenate.gov/Laws/Statutes/2026/500.80 https://www.law.cornell.edu/cfr/text/21/101.7 INGREDIENT BANK The current website list is the approved starting ingredient bank. Add or edit declarations and optional allergen statements directly in Manage ingredients. Saving is all that is needed; no verification steps, review checkboxes, or approval blocks are used. FIRST HARDWARE TEST — STILL REQUIRED - Print ONE label first. - Measure width and length against the displayed inches (with millimetres as secondary information); check that no text is clipped, the text is readable, and the cutter works. - Test one label on each roll, restarting the bridge for the loaded roll. - Test a three-label batch; verify exactly three labels and the cuts. - Disconnect the USB cable and test error handling. Windows can hold jobs while a printer is offline: inspect/cancel its queue before reconnecting or requesting another batch. - Only after these checks should real batches be used. STATUS AND RECOVERY "Bridge online" reports the bridge connection, not printer hardware status. "Sent to Windows" reports spool submission, not physical paper output. Claimed/failed jobs NEVER automatically reprint, to avoid duplicate batches. A bridge or network interruption may leave a claimed job. Check Windows' queue and physical output before manually submitting a fresh job. The bridge requests a 300 dpi custom continuous page for every batch. Some Brother driver versions may require custom paper setup; a size mismatch stops submission. Cutter behavior is controlled by Brother driver preferences and must be verified on the hardware. Windows execution and driver behavior have not been validated from the Mac. PowerShell scripts were syntax-checked; the one-time Windows installer and actual printing still require laptop testing. SERVER Isolated service: jenn-label-wizard.service (user reggie), port 8010. Application: /home/reggie/jenn_label_wizard Data: /home/reggie/jenn_label_wizard/data (SQLite). Back up this data directory before upgrades. Do not delete/reimport records or change the existing services. Network use is intended for trusted LAN or Tailscale only; do not expose port 8010 publicly.